Currently Empty: 0.00฿
-7,725.00฿
Torque Control UAN Series 3/8″Dr Range 6.5~12.0 Nm,620 rpm
• Designed for fastening in tight quarters or applications not served well by a pulse tool.
• The UAN Series transfers torque through beveled angle gears, continuously driving the fastener.
• When the resistance to rotation overcomes the spring resistance on the clutch, the tool will disengage at the adjusted torque value.
• Low reaction force characteristics on hard joints make it comfortable for the operator to use.
Product Description
Torque Control UAN Series 3/8″Dr Range 6.5~12.0 Nm,620 rpm
Model : UAN-611R-60C
• Torque Control Angle Nutrunner (Mechanical-Cat)
• Square Drive Shank : 9.5 mm (3/8″)
• Instant automatic shut-off providing reduced reaction.
• Low inertia design providing increased accuracy.
Performance Advantages
• Instant shut-off providing increased accuracy and reduced reaction.
• Low inertia design providing increased accuracy.
• Simple and accurate method to adjust torque output permitting quick setup.
• Smooth rolling selector allowing easy adjustment to forward rotation or reverse rotation.
• Rear exhaust providing low noise operation.
• Multiple angle head positions allowing comfortable operation on limited access application.
Specification รายละเอียด
• Capacity Bolt Size : M6
• แรงบิด Oulput Torque Range : 6.5~12.20 N•m
• แรงบิด Oulput Torque Range : 4.3~8.6 ft.lbs
• ความเร็วรอบ Free Speed (Approx.) : 620 RPM
• ความยาว Overall Length (about) : 383 mm
• Angle Height : 47 mm
• From Center to Outside (about) : 14.0 mm
• สายลม Air Hose Size (inside Dia.) : 3/8″
• ปริมาณลม Average Air Consumption : 0.60 m³/min
• ระดับเสียงรบกวน Noise Level : 80 dB(A)
• ระดับการสั่นสะเทือน Vibration Level : 1.78 m/sec²
• น้ำหนัก Weight less Bit (about) : 1.60 kg
| The New UAN-611R series Torque Control Angle Nutrunners offer exceptional fastening performance in the areas of productivity, ergonomics, reliability and quality. |
| • Simple and accurate method to adjust torque output by Phillips Driver permitting quick setup. |
| • Designed with a spline type interface allowing multiple head positions for the most comfortable throttle location on those hard to reach applications. |
| • The pneumatic motor is designed to offer high power performance by reducing motor inertia to the minimum level. |
| • Ergonomically designed Protector off |
| Weight | 1.60 kg |
|---|
Be the first to review “Torque Control UAN Series 3/8″Dr Range 6.5~12.0 Nm,620 rpm”
Customers Who Viewed This Item Also Viewed
-1,140.00฿
-6,350.00฿
-1,960.00฿
-6,370.00฿
There are no reviews yet.