Currently Empty: 0.00฿
HIOS BLG-BC2 Series Built-in Screw Counter Capacity Torque 0.2-1.2 N*M
• Misplaced screws of different type or length
• Direct teaching allows a simple setting
• Display panel indicates qty of the screws needed to be fastened.
• Made in japan
Product Description
Built-in Pulse Counter DC,BLG-BC2,Capacity Torque 0.2-1.2 N*M,[Two way]
Model : BLG-5000H5-BC2
• BLG-BC2 Series
• Brushless ScrewDriver
• Lever to Push-to Start Type (Two way )
JYUKUREN=Proficient
► Detect errors in screw fastening in real time with high accuracy by counting the pulse of the motor.
► No need to rely on the experience or logic of operators any longer.
► The screwdriver itself will enhance the quality of screw fastening.
Specification รายละเอียด
• Oulput Torque Range : 0.2 – 1.2 N・ m
• Oulput Torque Range : 1.7 – 10 lbf・in
• Oulput Torque Range : 2 – 12 kgf・cm
• Torque Switching : Stepless Adjustment
• Unloaded Rotation Speed (r.p.m)±10% : HI 1,000 / LOW 690
• Screw Size(mm) Machine Screw : 2.0-3.0
• Screw Size(mm) Tapping Screw : 2.0-3.0
• Dimensions(mm) Grip diameter : Ø 38 mm.
• Length : 235 mm.
• Weight : 425 g
• Bit Type : H5 or 5HEX
• Adapted power unit : T-70BL
• Cord Length : 2m
| ■ Direct teaching allows a simple setting |
| * Detect errors in screw fastening in real time with high accuracy by counting the pulse of the motor. * No need to rely on the experience or logic of operators any longer. * The screwdriver itself will enhance the quality of screw fastening. * Reduces the time and work needed for settings of the driver by fastening several screws directly on a work piece. * This allows the screwdriver to automatically recognize the pulse numbers of a motor from the beginning of tightening the screws,until they are seated (Max./Min. values). The reference values of Pass/Fail can be set with the permissible range of ±0 to 20% starting at the Max/Min values |
| ■ Drastically increases the error detection rate |
| * Screws that were once di!cult to judge visually, (misplaced screws of di"erent type or length, recessed screws or floating screws due to seized cables) are now detected |
| ■ Display panel indicates the measured values |
| * The user can check the measured values on their display panel, enhancing the user’s sense of security at work. |
| ■ Installed serial port (RS-232C) makes it possible to set the driver by remote control and record pulse values of each screw tightening for traceability. |
| NOTE Data transmission and reception are enabled by connecting with external devices, including PC and PLC. |
| Weight | 0.425 kg |
|---|---|
| Delivery Date |
There are no reviews yet.