Currently Empty: 0.00฿
UTP HUTP Poly-Urethenes Die ped ,Size 25-75 mm
• Standard Type for general work: natural color
• Heavy Load Type for heavy duty: Black
UTSX Urethane curve for Heavy Load ,Size 50-100 mm
• Heavy Load Type for heavy duty: Black
• H Shore 93-94º
-4,780.00฿
VA-5 Angle fixed milling vise 5″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-5,324.00฿
VA-6 Angle fixed milling vise 6″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-11,090.00฿
VA-8 Angle fixed milling vise 8″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-800.00฿
VB-1510PS-OPC For use with HIOS Screw Counter
• ใช้ต่อกับเครื่องนับสกรู
•ไขควงเหล่านี้ป้องกันไม่ให้คุณข้ามการขันสกรูร่วมกับตัวนับสกรู
• มีฟังก์ชั่นเพื่อส่งสัญญาณการหมุนในเชิงบวก, การหมุนกลับและสัญญาณแรงบิด (กระชับสมบูรณ์)
• สามารถเสียบเข้ากับเต้ารับ AC ได้โดยตรง
• สินค้านำเข้าจากญี่ปุ่น
-39,200.00฿
VEC-100 Ejector Pin Cutting Machine,Capacity Ø25 x 300L
• For cutting ejector pin of mould. Or machine key. Round rod.
• Easy to exchange the emery wheel.
• Made in Taiwan
VEESEL GT-MG55S Air Micro Grinder Speed 55,000 rpm
• Lightweight and compact. Pen holding touch.
• For Precision Grinding
• A 1.5m air intake hose, an exhaust hose and a hose joint are included in the package.
-2,248.00฿
VERTEX CK-10 52-PCS Steel Clamping Kit M10
• Heat treated steel black oxide finish.
• For mechanics, milling equipment, tools, other mechanic equipment
• Made in Taiwan
VERTEX VCF-500W Chamfering & Deburring Unit,Wheel-Type
• Simplified operation, suitable for unskilled personnel.
• Easily to be beveled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic etc.
-3,292.00฿
VERTEX VK-5 K-Type Milling vise 5″
• ปากกาจับชิ้นงาน K-Type Milling Vise 5 นิ้ว รุ่นประหยัด
• เป็นอุปกรณ์ที่ใช้งานจริงได้อย่างแม่นยำและมีคุณภาพสูง
• ปากกาเคลื่อนย้ายได้และฐานหมุนทำจากเหล็กหล่อแรงดึงสูงแบบละเอียด
• แผ่นเพสทำจากเหล็กกล้าพร้อมชุบแข็ง
• เหมาะที่สุดสำหรับงานกัดงานเจียรและงานเจาะ
-6,968.00฿
VERTEX VK-8 K-Type Milling vise 8″
• ปากกาจับชิ้นงาน K-Type Milling Vise 8 นิ้ว รุ่นประหยัด
• It’s a practical piece of equipment with excellent precision and a high quality finished.
• Body, movable jaw and swivel base made of close-grained high tensile iron castings. Built for heavy duty machining and retained accuracy.
• Jaw plates were made of hardened and grounded tool steel.
• It’s the most suitable for the Milling, Grinding and Drilling.