Currently Empty: 0.00฿
็HIOS HP Series Digital torque meter Peak mesuring range 1.5-100 kgf·cm
• Measured data can be imported to a computer.
• Up to 100 data items can be stored in the memory and controlled
• Torque for both clockwise or counterclockwise can be measured
• Made in japan
-1,600.00฿
-3,600.00฿
HIOS VB Series Screwdrivers Capacity Torque 0.4-1.8 N*M,AC Type
* The temperature rise of the motor is reduced by about 30% and reduces errors caused by heating.
* Can be directly plugged into AC outlet.
-3,600.00฿
HIOS VB Series Screwdrivers Capacity Torque 0.5-3 N*M,AC Type
• The temperature rise of the motor is reduced by about 30% and reduces errors caused by heating.
• Can be directly plugged into AC outlet.
• Made in japan
-3,500.00฿
HIOS VZ Series Screwdrivers AC Type Torque 0.9 – 3.0 N*M
• Transformer less type with built-in controller.
• Has built-in controller, transformer is required.
• Can be directly plugged into an AC outlet.
• Made in japan
-3,500.00฿
HIOS VZ Series Screwdrivers AC Type,Torque 0.4-1.8 N*M
* Transformer less type with built-in controller.
* Can be directly plugged into an AC outlet.
-6,500.00฿
HIOS VZOP-STC Power supply with screw counter For VB,VBH VZ Series
• The number of screws to be tightened can be set from 1 to 99, with the remaining number counted down after each screw is tightened.
• A buzzer will sound when the final screw has been tightened to notify you of screw tightening completion.
-10,595.00฿
HM-1203C Demolition Hammer,Accepts SDS‑MAX
• High durability and excellent demolition performance.
• One touch sliding chuck for easy bit installation and removal.
• Electronic speed control for maximum performance.
• Bit can be set at 12 positions for convenience.
• LED lamp indicates when to replace carbon brush.
• Carbon brush : CB-171
-16,931.00฿
HM-1307C Demolition Hammer,Accepts 30mm Hex bits
• High durability and excellent demolition performance.
• Electrical speed control for maximum performance.
• LED lamp indicates when to replace carbon brush.
• LED lamp is provided as a pilot lamp.
• Carbon brush : CB-171
-39,600.00฿
HM-1812 Advanced AVT Breaker Hammer,Accepts 26.8 mm Hex bits
• The new 70 lb. AVT® Breaker Hammer (model HM1812) is engineered to hit like an air hammer, but with less noise and vibration.
• It has a powerful 15 AMP motor that delivers a full 53.9 ft.lbs. (73.8 Joules) of impact energy, so contractors get hard-hitting performance.
• Users also benefit from less noise and lower vibration than an air hammer, and zero hassle with an air hose and compressor.
• The HM1812 features the latest Advanced AVT® Technology, a synchronized three-component system that more effectively reduces vibration.
• The internal mechanical counterbalance system, vibration-absorbing housing, and fixed movement handles are engineered for significantly less vibration during concrete breaking applications.
HORNG-DAR D Type Multiple Spindle Head Max Spindle Pitch 170 mm Spindle 2
• เMultiple Spindle Head (Tap/Drill) – D Type is made with following good points
• Customized type is available
• Made in taiwan
-3,600.00฿
HORNG-DAR Drilling Machine 2HP 380V Capacity 25 mm
* The body of the machine is made of FC20 iron
* Made in taiwan