Currently Empty: 0.00฿
-1,900.00฿
CL Adjustable Click Type Torque Wrench Torque range 5-25 N*m
• Interchangeable head applicable for multi-purpose use.
• By exchanging heads, the wrench services a variety of applications from open end spanner, ring, ratchet, hex heads, and more, with a single wrench.
• A clear “click” sound signals tightening completion upon reaching the set torque.
-637.50฿
CLA Type Hand-Pull Manual Lubricators,Tank 350 cc
* Low cost, high practicality. It can be used in diverse machinery.
* Easy to be operated by pushing the handle down for oil feeding.
* Small discharge volume and easy to install.
CLHA Type Grease Tube Manual Lubricator,Tank 400 cc
• It is suitable for the machinery that does not need to feed grease frequently.
-1,050.00฿
CLHA Type Manual Lubricator-Grease type,Tank 1000 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
-925.00฿
CLHA Type Manual Lubricator-Grease type,Tank 600 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
-987.50฿
CLHA-10 Type Manual Lubricator-Grease type,Tank 300 cc
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
-1,225.00฿
CLHP Type Hard Spring Manual Lubricator-Grease type,Tank 650 cc
• Manual grease type lubricator is small and easy for installation.
• The standard grease tube thread of CLHA-25 is M15 x P2.5 with reservoir cover and thread M15 x P2.0 is also availableon request.
• CLHP-40 and CLHP-50 have a hard spring inside that is suitable for NLGI grades 000 to 2.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
-5,680.00฿
COME UP ATV Winch : CUB2
• High efficiency, low amp draw and sealed permanent magnet motor
• Lightweight and compact design is ideal for easy installation
• Winch drum centred avoids the interference of rope and provides streamlined appearance
• Mechanical load holding and dynamic brake for 100% braking
• Cam activated clutch device for rapid wire rope payout
• Full metal 3 stage planetary gear train for greater pulling force
• Submersible sealed contactor handles high amps and allow higher duty cycle
-8,080.00฿
COME UP ATV WINCH : CUB3S
• 3,000 lb (1,361 kg) line pull
• Power in and power out
• Winch drum centred avoids the interference of rope and provides streamlined appearance
• Mechanical load holding and dynamic brake for 100% braking
• High efficiency, low amp draw and sealed permanent magnet motor
• Full metal 3 stage planetary gear train for greater pulling force
• Sliding pin and ring gear clutch for rapid synthetic rope payout
• Weather sealed contactor gives better water proof and lower amp. draw
• E/e marked as of EU Directive 97/24/EC. EEC Type – Approval Number: e4*97/24*97/24/8/IX*0036*01
-30,400.00฿
COME UP Baby Chain Hoist With 6M Chain
• มอเตอร์แม่เหล็กถาวรมีเอาต์พุตคงที่และระดับเสียงรบกวนต่ำ
• การออกแบบที่มีน้ำหนักเบาและกะทัดรัดเหมาะสำหรับการติดตั้งง่าย
• เบรกคู่และเบรกมอเตอร์แบบไดนามิกให้การทำงานที่ลื่นไหล
• คลัทช์กันลื่นไถลเพื่อความปลอดภัยป้องกันไม่ให้ตะขอติดอยู่กับรอกในทิศทาง“ ขึ้น”
• สวิตช์ตัดไฟเพื่อป้องกันไม่ให้รอกบรรทุกเกินพิกัด
• ตัวเรือนอลูมิเนียมหล่อที่แข็งแรงทนทานให้โครงสร้างที่แข็งแรง
• มีสวิตช์ w / หยุดฉุกเฉินมาเป็นมาตรฐาน
• ตะขอด้านล่าง 360 ° ที่ติดตั้งด้วยสลักล็อคแบบตัวเองมีตลับลูกปืนที่สามารถหมุนได้พร้อมกับโหลดที่ใช้งานได้อย่างปลอดภัย
• รับประกันสินค้า 1 ปี
-18,600.00฿
COME UP Car Winch 4WD DV-9I 12V
• Rated line pull 4,082 kg / 9,000 lb
• All sealed high performance motor supplies superior torque output and faster line speed.
• 3 stage planetary gearbox delivers the most reliable and durable performance of winch under the rugged conditions.
• The U.S., Germany, U.K., France, etc patented automatic CBS (Cone
• Brake Structure) holds firmly in full load and provides easy maintenance.
• Specific design of brake (CBS) outside the drum is ideally suited to heat-sensitive synthetic rope.
• Heavy duty sealed contactor ensures sound waterproof protection.
• Turn clutch by ergonomic T-handle for rapid rope payout.
• The equally positioned pin holes make it easily rotate by 40° increments for special in-bumper application.
• Protective thermal sensor LED.
-11,360.00฿
COME UP CP-200B Material Hoist Weight Hook
• Positive retention of wire rope on to drum
• Electromagnetic spring-applied failsafe
• Heavy duty high efficiency ball bearing on all running surfaces
• Planetary gears for maximum mechanical efficiency
• Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates
• Quiet running
• Emergency stop function switch is available upon request
• Low voltage control ass’y is available upon request