VA-5 Angle fixed milling vise 5″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
Product Description
VA-5 Angle fixed milling vise 5″
Code : VA-5
Specifications ข้อมูลจำเพาะ
• Jaw open : 110 mm.
• Gross Weight : 30 kg
Dimension
A | B | C Open | D | E | E1 | F | G | H | I | J | K | L | M | CFT (cm) | Max Clamp Forc (kgs) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
135 | 36 | 110 | 97 | 359 | 394 | 16 | 246 | 101 | 133 | 277 | 256 | 14.5 | 85 | 41x31x17 | 2000 |
* Use highest quality ductile Iron 80000 PSI for minimum bending. |
* The enclosed lead screw and sliding surface are harden and ground. |
* Highest clamping power. It’s very accurate and durable. |
* This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. |
* Therefore, the workplace does not move up, even if it is held at the top of the jaw plates. |
* Four setting positions of the jaw plates are available, widening the jaw plates opening. |
* The new VD675,VA-8L have two major improvements: a wide opening jaw and a new stationary jaw that features an intergral key,larger fasteners which reduce deflection by 50% |
Weight | 30.00 kg |
---|---|
Color สี |
There are no reviews yet.