KCMM-2 Automatic intermittent Lubricator,Controlled by Timer,Tank 2L
• Interval Time (min) : 5,10,15,30
• Made in taiwan
Product Description
KING-CHU Automatic intermittent Lubricator
• KCMM SERIES
Code : KCMM-2
► Use the recommended oil only. (#M32 or #68)
► Turn the motor only in the direction indicated. (The motor should be turned clockwise when looking down through the upper opening.
In the case of Model KCMM-2, it is not necessary to confirm the turning direction, because it turns only one way.)
► Do not fail to fasten firmly the locknut located at the upper side of the instant feed button after making adjustment to the dischange amount of oil.
► Pull the manual handle for 4 to 5 times before starting the motor or after the motor has not been used for prolonged time.
After pulling the manual handle, do not try to push back as the hurdle returns to its original position by spring action.
► Clean the filter or replace it with a new one once a year or more often.
Specification รายละเอียด
• Tank วัสดุถัง : Resin
• Interval Time (min) : 5,10,15,30
• Discharge Pressure (kg/cm2) : 2.5~3.0
• Discharge rate cc/shot : 2.5~5.5
• Outlet Dia : 4Ø or 6Ø
• Tank Vol(cc) : 2,000
• Effective Vol (cc) : 1,800
• Voltage : 220V.
• Weight น้ำหนัก (kg.) : 2.4
Note : Order No สั่งซื้อโปรดระบุ : / Interval Time (min) : 5,10,15,30
► Use the recommended oil only. (#M32 or #68) |
► Turn the motor only in the direction indicated. (The motor should be turned clockwise when looking down through the upper opening.In the case of Model KCMM-2, it is not necessary to confirm the turning direction, because it turns only one way.) |
► Do not fail to fasten firmly the locknut located at the upper side of the instant feed button after making adjustment to the dischange amount of oil. |
► Pull the manual handle for 4 to 5 times before starting the motor or after the motor has not been used for prolonged time. |
After pulling the manual handle, do not try to push back as the hurdle returns to its original position by spring action. |
► Clean the filter or replace it with a new one once a year or more often. |
How to adjust discharge oil amount of automatic intermittent lubricating pump.
* Fix the tip of piston rod (*) by ㊀ screwdriver, and loosen locknut Ⓘ counter lockwise. |
* Turn the connecting rod ② to set it at the standard positon after loosening the locknut Ⓘ and fix it firmly in that position. |
* The graduation and discharge amount are shown in the diagram on the right. |
Weight | 2.4 kg |
---|
There are no reviews yet.