Currently Empty: 0.00฿
-5,950.00฿
CHEN YING KSB-35 Grease Electric Lubricator 15W.220V.Tank 1000 cc
• KSB type has a timer, which controls the operation and interval time.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeders that can easily control the volume of lubricant.
• Made in taiwan
Product Description
CHEN YING KSB-35 Grease Electric Lubricator 15W.220V.Tank 1000 cc
Code : KSB-35180C3
• KSB Type
Specification รายละเอียด
• เวลาในการทำงาน Operation Time : 3sec-12 min
• ช่วงเวลา Interval Time : 1-180 min or 1-360 min
• มอเตอร์ Motor : 15 W
• ปริมาณสูงสุด Max Volume : 15 cc/min
• แรงดัน Max Pressure : 150kgf/cm2
• Voltage : 220v
• Ampere : 0.17A./50Hz
• ท่อ Discharge Bore : Ø 6 mm
• ความหนืด Viscosity : Grease NLGI grease 0 to 000
• วัสดุถัง Tank material : เรซิ่น
• ความจุ Capacity Liters : 1000 CC
• Fixed Hole Distanee (mm) : 65
• ความยาว Length (mm) : 217
• กว้าง Width (mm) : 138
• สูง Height (mm) : 280
• น้ำหนัก Weight : 4.25 kg
NOTE : ต้องการไฟ 110V,or DC24V ติดต่อพนักงานขาย
| * KSB type has a timer, which controls the operation and interval time. |
| * Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir. |
| * It has a pressure gauge where an operator can check the pressure easily. |
| * Recommend working with CV type progressive feeders that can easily control the volume of lubricant.CV type progressive feeders can be assembled with NO (Normal Open) or NC (Normal Close) sensor switch on request. |
| * Its function is similar to KSC type. KSC type is without timer and could be controlled by Programmable Logic Controller but KSB type is controlled by a timer. |
| * Fill the lubricator with grease and let it run several times to exhaust air before mounting the distributors. |
Application of Machines Equipment:
| * It is suitable for plastic or rubber processing machines,pressing and thermal treatment machines, etc. |
| Weight | 4.25 kg |
|---|
There are no reviews yet.