Currently Empty: 0.00฿
-5,550.00฿
CHEN YING KSB-50 Type Grease Electric Lubricator Tank 2000 cc
• KSB has a timer that controls its operation and interval time.
• KSB has a pressure gauge that enables the user to check the operating pressure easily.
• A magnetic level switch can be added to KSB on request to detect the grease level automatically.
• Please refill grease from the grease inlet of KSB to prevent air and impurities from entering the grease tank.
• Made in taiwan
CLHA Type Grease Tube Manual Lubricator,Tank 400 cc
• It is suitable for the machinery that does not need to feed grease frequently.
-1,050.00฿
CLHA Type Manual Lubricator-Grease type,Tank 1000 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
-925.00฿
CLHA Type Manual Lubricator-Grease type,Tank 600 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
-987.50฿
CLHA-10 Type Manual Lubricator-Grease type,Tank 300 cc
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
-1,225.00฿
CLHP Type Hard Spring Manual Lubricator-Grease type,Tank 650 cc
• Manual grease type lubricator is small and easy for installation.
• The standard grease tube thread of CLHA-25 is M15 x P2.5 with reservoir cover and thread M15 x P2.0 is also availableon request.
• CLHP-40 and CLHP-50 have a hard spring inside that is suitable for NLGI grades 000 to 2.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
KGB-35 Pressure-Relief Type Grease Pneumatic Lubricator Tank 1000 CC 220V
• KGB types are suitable for grease NLGI grades 000, 00 and 0.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• KGB can be operated by Programmable Logic Controller (PLC). The pressure relief system of KGB is pneumatic and recommendation for air pressure range is 4.5 ~ 8 kg. It has to work with CEB Type Volume Distributor which designs as a singular outlet with fixed discharge volume that each lubricating point has equal amount of lubricant. There are different types of discharge volume options such as 0.03, 0.06, 0.10, 0.16, 0.20, 0.30, 0.40, 0.50cc/ stroke upon request. Grease will feed during the operation time of the lubricator and the amount of grease feeding is fixed.
• Pressure switch can be added as optional for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn’t reach the default setting, it sends a alarm signal. NO (Normally Open) contact is available on the request.
• Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
• For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
• When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
• It has a pressure gauge that the operator can check the pressure easily.
-4,275.00฿
KSC-35 Grease Electric Lubricator 1000 CC 220V
• KSC type is without timer that could be controlled by Programmable Logic Controller.(PLC)
• It is divided by the volume of grease tank KSC-30(600cc), KSC-35(1000cc), KSC-40(800cc), and KSC-50(2000cc). Please refer to the specification for further details.
• Recommend using a grease gun for filling with lubricant from the grease inlet, It can avoid air or impurities dropping into the grease tank.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeder that can easily control the volume of lubricant.
CV type progressive feeder can be assembled with NO (Normal Open) or NC (Normal Close) sensor switch on request.
• Its function is similar to KSB type. The difference is that KSC type is without timer but KSB type is with timer.
• Fill the lubricator with grease and let it run several times to exhaust air before mounting the
distributors.
LCB3 Automatic motorized pump unit tank
• General purpose pump unit
The LCB3 units are fitted with a die-cast aluminum 3.4L tank, cover, and flange. IC timer (control board) fitted units can be adjusted to operate between 2 to 192 minutes, These units are also fitted with indicator lamps, enabling verification of operational status and errors.
Immediate oil distribution can be initiated manually, by pressing the “Instant Button”
• Made in japan