Currently Empty: 0.00฿
-2,025.00฿
CEN01-03 Resistance Electric Lubricator 3 L
• CEN01 type is without timer that could be controlled by Programmable Logic Controller and can work with many kinds of open distributors and proportion adapters.
• It has a pressure switch device and been set up as 1kg/㎝² for checking if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have abnormal signal.
NO (Normal Open) contact is available on request.
• It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC to be interfered.
• It has a float switch that can detect the volume of oil. It will have abnormal signal automatically when the oil level is lower than the standard.
• Please don’t press the force feed-oil ( F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
• It has a pressure gauge, which can detect the pressure.
• Its function is similar to CEN02 type. The difference is that CEN01 type is without timer and CEN02 type is controlled by a timer. CEN03 and CEN04 types are pressure-relief type electric lubricators.
-2,450.00฿
CEN03-03 Type Pressure-relief Electric Lubricator Controlled by PLC Tank 3L
• CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors.
• With CAB or CBB type volume distributor, oil will feed during operation time.
• With CDB or T type volume distributor, oil will feed during interval time.
• The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
• It has a spark-eliminator inside to prevent the sparks producing when the electric current is running.
• The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
• CEN03 type has a pressure switch device and been set up as 8kg/㎝², which assures the oil volume of lubrication point and check if the piping works normally.
• The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
• It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
CESW-03 Resistance Electric Lubricator 3 L
• The operation time and interval time can be adjusted easily as need.
• CESW type resistance lubricator has time memory function that can automatically memorize the original operation and interval time settings. If the power is suddenly off, it will continue the cycle after the power is back.
• Two operation models of CESW are for option: Turn On-Feeding or Turn On-Interval. Turn On-Feeding type will feed oil after turning on the power. Turn On-Interval type will be interval after turning on the power.
• It has a float switch that can detect the oil volume. When the oil is lower than minimum level, the float switch will send continuous signal and the buzzer will alarm.
• Made in taiwan
-2,275.00฿
CHEN YING CEN03 Type Pressure-Relief Electric Lubricator by PLC Tank 2L
• CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors.
• With CAB or CBB type volume distributor, oil will feed during operation time.
• With CDB or T type volume distributor, oil will feed during interval time.
• The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
• It has a spark-eliminator inside to prevent the sparks producing when the electric current is running.
• The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
• CEN03 type has a pressure switch device and been set up as 8kg/㎝², which assures the oil volume of lubrication point and check if the piping works normally.
• The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
• It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
• Made in taiwan
-1,300.00฿
CHEN YING CEV Type Resistance Electric Lubricator Controlled by PLC Tank 3L
• CEV type is without timer (also could be controlled by Programmable Logic Controller) and can work with many kinds of open type distributors and proportion adapters.
• It has a pressure-regulating valve, which can adjust the pressure.
• It has a pressure gauge that can detect the pressure easily.
• It has a float switch (NC Contact) that can detect the oil volume. When oil is lower than the minimum level, the float switch will send continuous signal automatically.
• It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied
for large machines’ request.
• For CEV 3L or above, it can be added a pressure switch, power indicator and feed-oil button on request.
-2,625.00฿
CHEN YING CEVB Type Pressure-relief Electric Lubricator Controlled by PLC Tank 3L
• It can be used for the machines requiring strictly rationing oil flow.
• It can be specially used for the machines requiring large oil output and large pressure output.
• It is usually used for such as processing machines or projecting machines.
LCB3 Automatic motorized pump unit tank
• General purpose pump unit
The LCB3 units are fitted with a die-cast aluminum 3.4L tank, cover, and flange. IC timer (control board) fitted units can be adjusted to operate between 2 to 192 minutes, These units are also fitted with indicator lamps, enabling verification of operational status and errors.
Immediate oil distribution can be initiated manually, by pressing the “Instant Button”
• Made in japan
Showing all 7 results