Currently Empty: 0.00฿
-3,200.00฿
CHEN YING PMO-1 Integrated Motor with Oil Pump 1/4 HP Flow rate 6.5 l/min
• Integrated Motor with Oil Pump only rotates either clockwise or anti-clockwise and the specification is only available for 1/4 HP Horizontal Motor.
• The shafts of motor and pump rotor are integrated so that it can prevent the two shafts from chafing against each other and prolong the life time of it.
• There are CYP-12A and CYP-13A available for different flow rates.
• It can be added an adjustable pressure valve as optional. The range of pressure adjustment is 2~5 kgf/cm².
• It can be applied widely for lubricating or cooling in various machines, such as CNC
machines, knitting machines and planning machines.
• Suitable oil viscosity range is 32~68cSt@40 ℃
• The suitable operation temperature range is 0℃ ~ 90℃.
• Made in taiwan
-637.50฿
CLA Type Hand-Pull Manual Lubricators,Tank 350 cc
* Low cost, high practicality. It can be used in diverse machinery.
* Easy to be operated by pushing the handle down for oil feeding.
* Small discharge volume and easy to install.
-925.00฿
CLHA Type Manual Lubricator-Grease type,Tank 600 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
-987.50฿
CLHA-10 Type Manual Lubricator-Grease type,Tank 300 cc
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
-1,225.00฿
CLHP Type Hard Spring Manual Lubricator-Grease type,Tank 650 cc
• Manual grease type lubricator is small and easy for installation.
• The standard grease tube thread of CLHA-25 is M15 x P2.5 with reservoir cover and thread M15 x P2.0 is also availableon request.
• CLHP-40 and CLHP-50 have a hard spring inside that is suitable for NLGI grades 000 to 2.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
-500.00฿
CYP-12A Rotary Oil Pump 1/4″ (Clockwise or Anti-clockwise)
• Rotary oil pump is also called triangular pump or oil circulation pump.
• Recommend to assemble with 1/4 HP Horizontal Motor.
• The flow rate of CYP-10A ~ 13A are all different, and the standard model is clockwise. Please remark on order while request anti-clockwise one.
• It can be added an adjustable pressure valve CYP-AV as optional. The range of pressure adjustment is 0~5 kg/cm².
• Special request on assembling with reservoir or cyclic inlet or motor with fan, etc. are available. Refer to Chen Ying Circulating Electric Lubricator series products.
• The standard revolution is 1420~1720 rpm. Low rpm 450~1200 rpm is only available for CYP-12L type.
• It can be applied widely for lubricating or cooling in various machines.
• The suitable oil viscosity is R32~68cSt @ 40 ℃ and suitable operating temperature is 0℃ ~ 90℃.
• Made in taiwan
-5,250.00฿
CYP-206 Heavy Oil Pump with Horizontal Motor 1/2 HP Flow rate 11.3 l/min
• It can steady provides oil.
• It is easy to operate and install.
• The discharge volume and pressure is bigger than the rotary oil pump.
• Recommend to assemble with an adjustable valve and working pressure under 10 kgf/cm2 in order to avoid damaging oil pump function.
• Use clean oil to avoid the block or damage the pump.
• The connector can help to reduce the noise while the motor is operating. It also can make the shaft much more durable. With a dust-shelter for the safety concern.
• 1/2HP and 1HP TECO motor are available on request. Please mark M while ordering.
• The proper oil viscosity is 32~220cSt@40
• Recommend to install an Oil Auto Cleaner or a Line Filter to prevent any impurities from clogging or causing damage to the heavy oil pump in order to prolong the life cycle of heavy oil pump.
• Made in taiwan
-3,037.50฿
CYP-210 Heavy Oil Pump 3/4″ Discharge Volume 19-23 L/MIN
• The pressure and discharge volume is bigger than the rotary oil pump. It’s easy to operate and install.
• Use clean oil to avoid the block or damage the pump.
• Standdard fixed-hole direction is \. If the fixed-hole direction is /, please mark ※ T on order code.
• The connector can help to reduce the noise while the motor is operating. It also can make the shaft much more durable. With a dust-shelter for the safety concern.
• The proper oil viscosity is 32~220cSt@40℃9.
• Recommend to install an Oil Auto Cleaner or a Line Filter to prevent any impurities from clogging or causing damage to the heavy oil pump in order to prolong the life cycle of heavy oil pump.
-625.00฿
CYP-3FS Reversible Pump 1/4″ (Clockwise and Anti-clockwise)
• Reversible pump uses three pieces of M6*16L screw to make inlet and outlet be fixed. The rotating shaft can reverse clockwise or anti-clockwise during the operation of machine.
• It is suitable for assembling with gear pump.
• There are CYP-1FS~3FS available for different flow rate. The high revolution is 2,000 rpm.
• Reversible pump is usually applied in Drilling Machines, Milling Machines, and CNC Lathes, etc.
• The suitable oil viscosity is R32~68cSt @ 40℃.
• Made in taiwan
-885.00฿
HT-160 Heat Nippers For Cutting Plastics
• The built-in heater warms the blade edges for easier, crack-free cutting of fragile materials such as acrylics, styrene plastic, and glass resins.
• These heat nippers must be used with suitable trasformer
KGB-35 Pressure-Relief Type Grease Pneumatic Lubricator Tank 1000 CC 220V
• KGB types are suitable for grease NLGI grades 000, 00 and 0.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• KGB can be operated by Programmable Logic Controller (PLC). The pressure relief system of KGB is pneumatic and recommendation for air pressure range is 4.5 ~ 8 kg. It has to work with CEB Type Volume Distributor which designs as a singular outlet with fixed discharge volume that each lubricating point has equal amount of lubricant. There are different types of discharge volume options such as 0.03, 0.06, 0.10, 0.16, 0.20, 0.30, 0.40, 0.50cc/ stroke upon request. Grease will feed during the operation time of the lubricator and the amount of grease feeding is fixed.
• Pressure switch can be added as optional for checking if the piping works normally. The standard setting is at 60 bars and the standard specification is NC (Normally Closed) contact, which means if the pressure doesn’t reach the default setting, it sends a alarm signal. NO (Normally Open) contact is available on the request.
• Magnet Level Switch is also an optional accessory that can be added upon request. It sends continuous signal automatically when the grease level is lower than the minimum level.
• For the first time use, slightly press the Feed button (F button) to feed grease immediately. F button can be used as manually grease feeding for no more than 3 minutes.
• When the motor temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
• It has a pressure gauge that the operator can check the pressure easily.
-4,275.00฿
KSC-35 Grease Electric Lubricator 1000 CC 220V
• KSC type is without timer that could be controlled by Programmable Logic Controller.(PLC)
• It is divided by the volume of grease tank KSC-30(600cc), KSC-35(1000cc), KSC-40(800cc), and KSC-50(2000cc). Please refer to the specification for further details.
• Recommend using a grease gun for filling with lubricant from the grease inlet, It can avoid air or impurities dropping into the grease tank.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeder that can easily control the volume of lubricant.
CV type progressive feeder can be assembled with NO (Normal Open) or NC (Normal Close) sensor switch on request.
• Its function is similar to KSB type. The difference is that KSC type is without timer but KSB type is with timer.
• Fill the lubricator with grease and let it run several times to exhaust air before mounting the
distributors.