CEF Type Circulating Electric Lubricator,Controlled by Timer,Tank 4L
•The circulating type electric lubricator that is designed to circulate the oil for reuse; therefore, it can save the usage of oil during the lubrication.
CEH-05 Type Circulating Electric Lubricator 25W,220V Controlled by PLC,Tank 4L
• CEH is a circulating type lubricator which means the oil flows out from the discharge outlet into the oil pipes to the lubricating points then continues flowing back into the oil tank through the cyclic inlet. The cyclic inlet has a magnetic filter which can prevent the impurities from getting into the oil tank in order to assure the oil clean.
• CEH type is without the timer that could be also controlled by the Programmable Logic Controller (PLC).
• After installing the CEH type lubricator and connecting the oil pipes, let the lubricator continue running til the oil fulfils the oil pipes and the oil flows out to exhaust the air, then the lubricator is ready to use.
• It has a high quality alloy steel pump that not only can provide steady output pressure and low noise,but also can assure the oil reaches each lubricating point. It is suitable for applying in the large machineries’ demands.
• It has a pressure-regulating valve and pressure gauge that an operator can adjust the pressure and check the pressure easily.
• It has a float switch that can detect the oil level. It sends continuous signals automatically when the oil level is lower than the minimum. The standard specification is NC contact and NO contact is available on request.
CEN01-03 Resistance Electric Lubricator 3 L
• CEN01 type is without timer that could be controlled by Programmable Logic Controller and can work with many kinds of open distributors and proportion adapters.
• It has a pressure switch device and been set up as 1kg/㎝² for checking if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have abnormal signal.
NO (Normal Open) contact is available on request.
• It has a spark-eliminator inside to prevent the sparks producing when the electric current is running. The spark-eliminator can avoid PLC to be interfered.
• It has a float switch that can detect the volume of oil. It will have abnormal signal automatically when the oil level is lower than the standard.
• Please don’t press the force feed-oil ( F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.
• It has a pressure gauge, which can detect the pressure.
• Its function is similar to CEN02 type. The difference is that CEN01 type is without timer and CEN02 type is controlled by a timer. CEN03 and CEN04 types are pressure-relief type electric lubricators.
CEN22-03 Horizontal Oil-Mist Electric Lubricators,Controlled by Timer,Tank 3L
• The timer controls the operation and interval time. The electronic box has operation and interval indicators.
• The electronic box can automatically save the original operation and interval time while the power is suddenly off. After turning on the power, it would return to the original setting time and start the cycle again.
• It has a feed-oil button ( F button), press the button and the oil will feed immediately.
• The discharge volume is stable and can be adjusted by the pressure-regulating valve. Turning the valve clockwise, the oil volume will increase, and turning anticlockwise, the oil volume will reduce.
• When the power of the lubricator is off, the air pressure and output power will be turned off at the same time for safety.
• It has a pressure-regulating valve, which can adjust the pressure and easy to check from the pressure gauge.
• It has a float switch that can detect the oil volume. It will have an automatic signal when the oil level is lower than the minimum.
CEN24-03 Horizontal Oil-Mist Electric Lubricators Controlled by PLC Tank 3L
• CEN24, CEN25 types are without timer, also could be controlled by Programmable Logic Controller (PLC).
• The discharge volume is stable and can be adjusted by the pressure-regulating valve. Turning the valve clockwise, the oil volume will increase, and turning anticlockwise, the oil volume will reduce.
• When the power of the lubricator is off, the air pressure and output power will be turned off at the same time for safety.
• It has a pressure-regulating valve, which can adjust the pressure and easy to check from the pressure gauge.
• It has a float switch that can detect the oil volume. It will have abnormal signal automatically when the oil level is lower than the minimum.
CESW-03 Resistance Electric Lubricator 3 L
• The operation time and interval time can be adjusted easily as need.
• CESW type resistance lubricator has time memory function that can automatically memorize the original operation and interval time settings. If the power is suddenly off, it will continue the cycle after the power is back.
• Two operation models of CESW are for option: Turn On-Feeding or Turn On-Interval. Turn On-Feeding type will feed oil after turning on the power. Turn On-Interval type will be interval after turning on the power.
• It has a float switch that can detect the oil volume. When the oil is lower than minimum level, the float switch will send continuous signal and the buzzer will alarm.
• Made in taiwan
CHEN YING CEN03 Type Pressure-Relief Electric Lubricator by PLC Tank 2L
• CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors.
• With CAB or CBB type volume distributor, oil will feed during operation time.
• With CDB or T type volume distributor, oil will feed during interval time.
• The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
• It has a spark-eliminator inside to prevent the sparks producing when the electric current is running.
• The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
• CEN03 type has a pressure switch device and been set up as 8kg/㎝², which assures the oil volume of lubrication point and check if the piping works normally.
• The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
• It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
• Made in taiwan
CHEN YING CEV Type Resistance Electric Lubricator Controlled by PLC Tank 3L
• CEV type is without timer (also could be controlled by Programmable Logic Controller) and can work with many kinds of open type distributors and proportion adapters.
• It has a pressure-regulating valve, which can adjust the pressure.
• It has a pressure gauge that can detect the pressure easily.
• It has a float switch (NC Contact) that can detect the oil volume. When oil is lower than the minimum level, the float switch will send continuous signal automatically.
• It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied
for large machines’ request.
• For CEV 3L or above, it can be added a pressure switch, power indicator and feed-oil button on request.
CHEN YING CKE Type Hand-Pressing Lubricator-Right Type Tank 1 L
• Small volume and easy for installation.
• Low cost, high practicality. It can be used in diverse machinery.
CHEN YING KSB-35 Grease Electric Lubricator 15W.220V.Tank 1000 cc
• KSB type has a timer, which controls the operation and interval time.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeders that can easily control the volume of lubricant.
• Made in taiwan
CHEN YING KSB-50 Type Grease Electric Lubricator Tank 2000 cc
• KSB has a timer that controls its operation and interval time.
• KSB has a pressure gauge that enables the user to check the operating pressure easily.
• A magnetic level switch can be added to KSB on request to detect the grease level automatically.
• Please refill grease from the grease inlet of KSB to prevent air and impurities from entering the grease tank.
• Made in taiwan
CHEN YING PMO-1 Integrated Motor with Oil Pump 1/4 HP Flow rate 6.5 l/min
• Integrated Motor with Oil Pump only rotates either clockwise or anti-clockwise and the specification is only available for 1/4 HP Horizontal Motor.
• The shafts of motor and pump rotor are integrated so that it can prevent the two shafts from chafing against each other and prolong the life time of it.
• There are CYP-12A and CYP-13A available for different flow rates.
• It can be added an adjustable pressure valve as optional. The range of pressure adjustment is 2~5 kgf/cm².
• It can be applied widely for lubricating or cooling in various machines, such as CNC
machines, knitting machines and planning machines.
• Suitable oil viscosity range is 32~68cSt@40 ℃
• The suitable operation temperature range is 0℃ ~ 90℃.
• Made in taiwan