Currently Empty: 0.00฿
-2,275.00฿
CHEN YING CEN03 Type Pressure-Relief Electric Lubricator by PLC Tank 2L
• CEN03 type is without timer (also could be controlled by Programmable Logic Controller) and has to work with volume distributors.
• With CAB or CBB type volume distributor, oil will feed during operation time.
• With CDB or T type volume distributor, oil will feed during interval time.
• The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.
• It has a spark-eliminator inside to prevent the sparks producing when the electric current is running.
• The spark-eliminator can avoid PLC (Programmable Logic Controller) being interfered.
• CEN03 type has a pressure switch device and been set up as 8kg/㎝², which assures the oil volume of lubrication point and check if the piping works normally.
• The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal. NO (Normal Open) contact is available on request.
• It has a float switch that can detect the oil volume. When oil is lower than the minimum level, the float switch will automatically send a continuous signal.
• Made in taiwan
-1,300.00฿
CHEN YING CEV Type Resistance Electric Lubricator Controlled by PLC Tank 3L
• CEV type is without timer (also could be controlled by Programmable Logic Controller) and can work with many kinds of open type distributors and proportion adapters.
• It has a pressure-regulating valve, which can adjust the pressure.
• It has a pressure gauge that can detect the pressure easily.
• It has a float switch (NC Contact) that can detect the oil volume. When oil is lower than the minimum level, the float switch will send continuous signal automatically.
• It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied
for large machines’ request.
• For CEV 3L or above, it can be added a pressure switch, power indicator and feed-oil button on request.
-2,625.00฿
CHEN YING CEVB Type Pressure-relief Electric Lubricator Controlled by PLC Tank 3L
• It can be used for the machines requiring strictly rationing oil flow.
• It can be specially used for the machines requiring large oil output and large pressure output.
• It is usually used for such as processing machines or projecting machines.
-700.00฿
CHEN YING CLA Type Hand-Pull Manual Lubricators Tank 600 cc
* Low cost, high practicality. It can be used in diverse machinery.
* Easy to be operated by pushing the handle down for oil feeding.
* Small discharge volume and easy to install.
-5,950.00฿
CHEN YING KSB-35 Grease Electric Lubricator 15W.220V.Tank 1000 cc
• KSB type has a timer, which controls the operation and interval time.
• Recommend using a grease gun for filling with lubricant from grease inlet. It can avoid air or impurities dropping into the reservoir.
• It has a pressure gauge where an operator can check the pressure easily.
• Recommend working with CV type progressive feeders that can easily control the volume of lubricant.
• Made in taiwan
-1,050.00฿
CLHA Type Manual Lubricator-Grease type,Tank 1000 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
-925.00฿
CLHA Type Manual Lubricator-Grease type,Tank 600 cc
• CLHA type has an air tight pushing lump, which can press grease out smoothly.
• Low cost and high practicality. It can be applied to various types of machines.
• Easy to be operated by pushing the handle down for oil feeding.
• Small size and easy for installation.
• CLHA type is suitable for Grease NLGI 000~0
• Recommend using a grease gun for filling with lubricant from the grease inlet. It can avoid air or impurities dropping into the reservoir.
• Fill the lubricator with grease and press several times to exhaust air before mounting the distributors.
Showing all 7 results