Currently Empty: 0.00฿
-11,236.00฿
BS-0-J-5 Semi-universal dividing head with 3 jaw chuck 5″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
-22,365.00฿
BS-2A-J6 Universal Dividing Head With 3 Jaw Chuck 6″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation
• Made in taiwan
ER Spring Collet Chuck With Taper Shank,NT30-50
* Made in Taiwan
* Price per product / 1 pcs
* Order specified: Model
-4,025.00฿
HV-6 Horizontal -Vertical Rotary Table 6″
• Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible.
Live Lathe Center VLC Series
• Center shaft & main body are made of alloy steel under heating treatment to provide higher rigidity (HRC60° ± 2°) and satisfied wear-resistance.
-55,160.00฿
U2 Universal cutter grinder
• For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative taper angle of cutters.
• The universal index head is provided at 24 positions so that any particular angel or shape can be obtained, free 3600 or 100 rotation is allowed for grinding End Mills.
• Twist Drill. Lathe Tools, only replace the attachment to the index head without any complex setup.
• Made in Taiwan
-4,780.00฿
VA-5 Angle fixed milling vise 5″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-9,390.00฿
VA-6 Angle fixed milling vise 6″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-23,300.00฿
VA-8 Angle fixed milling vise 8″
• Use highest quality ductile Iron 80000 PSI for minimum bending.
• The enclosed lead screw and sliding surface are harden and ground.
• Highest clamping power. It’s very accurate and durable.
• This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward.
• Therefore, the workplace does not move up, even if it is held at the top of the jaw plates.
• Four setting positions of the jaw plates are available, widening the jaw plates opening.
• Made in taiwan
-2,248.00฿
VERTEX CK-10 52-PCS Steel Clamping Kit M10
• Heat treated steel black oxide finish.
• For mechanics, milling equipment, tools, other mechanic equipment
• Made in Taiwan
VERTEX VCF-500W Chamfering & Deburring Unit,Wheel-Type
• Simplified operation, suitable for unskilled personnel.
• Easily to be beveled for any length made of steel, cast iron, nonferrous metals, plastics, acrylic etc.
-3,292.00฿
VERTEX VK-5 K-Type Milling vise 5″
• ปากกาจับชิ้นงาน K-Type Milling Vise 5 นิ้ว รุ่นประหยัด
• เป็นอุปกรณ์ที่ใช้งานจริงได้อย่างแม่นยำและมีคุณภาพสูง
• ปากกาเคลื่อนย้ายได้และฐานหมุนทำจากเหล็กหล่อแรงดึงสูงแบบละเอียด
• แผ่นเพสทำจากเหล็กกล้าพร้อมชุบแข็ง
• เหมาะที่สุดสำหรับงานกัดงานเจียรและงานเจาะ