L6272P_2.0MM G Series Endmills 2 Flutes
• ดอกเอ็นมิลล์ไฮสปีดโคบอลต์สีทองเคลือบ TiN 2 ฟัน
• สามารถใช้รอบการกัดที่สูง อายุการใช้งานยาวนาน
• ด้วยความยาวฟันมาตรฐานสามารถใช้สำหรับการตัดข้างและการทำร่อง เหมาะสำหรับกัดวัสดุแข็งต่างๆ
• ขนาดที่มีจำหน่าย Dia 1.5 ~ 32.0 mm.
• ราคาต่อ 1 ชิ้น
L6274P_12.0MM G-Series End Mills
• ดอกเอ็นมิลล์ไฮสปีดโคบอลต์สีทองเคลือบ TiN 4 ฟัน
• สามารถใช้รอบการกัดที่สูง อายุการใช้งานยาวนาน
• ด้วยความยาวฟันมาตรฐานสามารถใช้สำหรับการตัดข้างและการทำร่อง เหมาะสำหรับกัดวัสดุแข็งต่างๆ
• ขนาดที่มีจำหน่าย Dia 2.5 ~ 50 mm.
• ราคาต่อ 1 ชิ้น
L6602_15.0MM Cobalt Taper Shank Drill HSS CO
• This is general HSS-Co taper drill.
• Size Dia 7.0 ~ 33.0
• ราคาต่อ 1 ชิ้น
L7904P_M12.0X1.75 G Spiral Taps
• This tap is suitable for high-speed tapping blind holes.
• Size M 12 x 1.75 mm
• Made in Japan
L7904P_M8.0X1.25 G Spiral Taps
• This tap is suitable for high-speed tapping blind holes.
• Size M 8 x 1.25 mm
• Made in Japan
L7916P_M10X1.5X150 G Spiral Taps Long Shank
• This tap is used when a standard G Spiral Tap is too short.
• Size M 10 x 1.5 x 150 mm.
• Made in Japan
L7916P_M4X0.7X100 G Spiral Taps Long Shank
• This tap is used when a standard G Spiral Tap is too short.
• Size M 4 x 0.7 x 100 mm.
• Made in Japan
L9382_1.5MM GS-Mill 2 Flutes
• L9382_1.5MM GS-Mill 2 Flutes
• This end mill having sharp edge corner is suitable for high-speed and long life milling of workpiece materials from raw materials to hardened materials, and is used in grooving.
L9550_5.0MM AQUA Drill Stub
• วัสดุ Material: Carbide
• AQ (TiAlN multi layer) Coating
• This drill having stub length is suited for high-speed and long life drilling, and is useful in dry-process.
• This is suitable for most workpiece materials from raw material to hardened material.
X’s-Mill Series End Mills 2 Flutes List-9470,dia 1-20 mm
• Material วัสดุ : CARBIDE+X’s Coating
• JIS standard